banner



How to upgrade the HDD in your Lenovo ThinkPad P52

The Lenovo ThinkPad P52 is designed as a mobile workstation, and information technology brings plenty of space for M.2 solid-land drive (SSD) storage, likewise as a spot for a 2.5-inch SATA drive. Most models ship from the factory with at least a 2.5-inch difficult-disk drive (HDD), which keeps the cost down while still offer enough of space. However, if you need more than infinite or you want faster storage, you tin upgrade the 2.five-inch HDD with relative ease. Here's everything you demand to know to complete the process.

Hardware and software to go the job done

  • 2.5-inch SATA SSD: Samsung 860 EVO SSD (From $58 at Amazon)
  • Enclosure for cloning: Inateck SATA drive enclosure ($xx at Amazon)
  • Cloning tool: Macrium Reflect 7 (Free at Macrium)
  • Prevent damage: Rosewill anti-static wristband ($6 at Amazon)
  • All required tools: ORIA PC toolkit ($33 at Amazon)
  • Mobile workstation: Lenovo ThinkPad P52 (From $1,349 at Lenovo)

How to upgrade the HDD in your Lenovo ThinkPad P52

Annotation: Earlier beginning any upgrades on a PC, it'southward a good idea to support your data in the unlikely event something should go wrong. You'll besides want to ensure you're not working in a static-filled environment, equally it tin cause damage to a PC's internal hardware. Consider investing in an anti-static wristband to avert unnecessary damage.

Cheers to having enough of room inside its thick chassis, Lenovo's ThinkPad P52 has two slots for M.two solid-country drives (SSD) — which can be upgraded — and a spot for a 2.5-inch SATA HDD or SSD. Since models come from the factory with a relatively slow HDD, we recommend upgrading to Samsung's 860 EVO SATA SSD, which brings improved performance upwards to 4TB in size.

If you lot have a model without a secondary M.ii PCIe SSD, Windows 10 will be installed on the original 2.v-inch drive. In this case, yous tin can clone all data, including the OS, over to the new 2.5-inch bulldoze, or y'all can do a make clean install of Windows x to start completely fresh.

If you lot're cloning to a new 2.5-inch drive, we've had much success using Macrium Reflect, and have written a guide to assistance yous through the unabridged procedure. You'll also want to pick upwardly an external SATA enclosure that tin exist used to clone to old drive to the new one before the swap.

Once you've made the necessary data backup and have completed any drive cloning, articulate out a well-lit workspace and power down your ThinkPad P52 before starting with the steps below.

  1. Unscrew the six fasteners on the quick-access panel using a Philips-head screwdriver. The screws can't be removed completely to ensure none are lost.

    Unscrew the six fasteners.

  2. Lift up the admission panel with a thumb or pry tool. Find there's a notch forth the edge to easily become information technology upwards.

    Lift up the access panel

  3. Printing the HDD mount clip on the back end of the drive and so that information technology detaches. This is best done using a pry tool.

    Press the HDD mount clip

  4. Pry up the HDD and mount using a pry tool. It should come loose with relative ease. Be careful you do not harm the SATA connector that runs forth the height of the HDD.

    Pry up the HDD and mount

  5. Unplug the SATA connector from the finish of the HDD.

    Unplug the SATA connector

  6. Remove the plastic gasket from around the HDD. It pulls out without the need for tools.

    Remove the plastic gasket

  7. Attach the plastic gasket to the new storage drive. Notice there are plugs for the usual screw holes along the side of the HDD.

    Attach the plastic gasket to the new drive

  8. Reattach the SATA connector to the new storage drive. Discover that it will just fit i way.

    Reattach the SATA connector

  9. Slide the new storage bulldoze into the mountain in the laptop. Realign the SATA cable so that information technology's not in the way.

    Slide the drive and mount into the laptop

  10. Press down on the new drive until the end clip clicks into place. This secures the bulldoze.

    Press down until the drive clips back into place

  11. Replace the admission console, lining up the fasteners with the silverish holes.

    Replace the access panel

  12. Screw in the six fasteners attached to the access panel.

    Screw in the six fasteners

You can now boot up your ThinkPad P52 to cheque if the storage upgrade went according to plan. If your system doesn't automatically recognize the new drive, check out our guide on how to format a new bulldoze to get information technology working properly.

Our meridian hardware and software picks

Our pick for an upgrade is Samsung's 860 EVO 2.5-inch SATA SSD, which adds better performance and can add more space depending on the size you purchase.

Fast SATA SSD

Samsung 860 EVO

Up to 4TB of speedy storage

Go read speeds up to 550 MB/southward and write speeds up to 520 MB/s for superior performance, and accept advantage of a 5-year warranty. If you're going to the trouble of replacing your HDD, do it right with the 860 EVO.

It'due south thick and it's heavy, only the ThinkPad P52 brings a powerful drove of hardware focused on blueprint and development, a cute 4K display, outstanding keyboard, and enough of ports. A quick-access console on the back makes it easy to admission RAM slots, SSD slots, and 2.5-inch storage.

Mobile workstation

Lenovo ThinkPad P52

Trade performance for portability

The ThinkPad P52 trades portability and bombardment life for outstanding performance. The 4K brandish is beautiful, there are plenty of ports, the keyboard is top-of-class, and you tin upgrade hardware downwards the line to keep the laptop relevant into the hereafter.

Additional Equipment

To make the upgrade process easier and less risky, consider investing in some of these affordable PC tools, and don't forget about Macrium Reverberate for those who want to clone drives.

Inateck SATA enclosure ($20 at Amazon)

If you'd like to clone the ii.5-inch HDD's data over to your new storage, an external enclosure will facilitate the procedure. Insert the new SSD or HDD into the enclosure, plug it into your laptop with USB-C or USB-A, and let the cloning software take over.

Macrium Reflect 7 (Complimentary at Macrium)

We've had success cloning drives with Macrium Reverberate seven, and have fifty-fifty written a consummate guide on how to use it properly. A complimentary edition is available, but you can purchase a total edition with a bunch more features for those who truly take backups seriously.

ORIA PC toolkit ($34 at Amazon)

Having the proper gear to work on your PC will ever make the job much easier. Here yous go a plethora of tools contained in a portable case.

Rosewill anti-static wristband ($vi at Amazon)

Static electricity can damage sensitive PC parts, so remove the risk with an anti-static wristband. Fasten information technology around your wrist and prune it onto your PC for peace of heed.

We may earn a commission for purchases using our links. Learn more.

Source: https://www.windowscentral.com/how-upgrade-hdd-your-lenovo-thinkpad-p52

Posted by: byrdboashe.blogspot.com

0 Response to "How to upgrade the HDD in your Lenovo ThinkPad P52"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel